公路防撞墙模具一般都是采用现浇筑的方式来操作的，都是经过固定，然后把混凝

土灌入到模具当中的。公路防撞墙模具一般在高速公路上使用的，我们经常会见到

高速公路上有各种防撞墙，这些都是采用公路防撞墙模具拼接而成的，符合一定的

使用标准，采用圆弧的设计，平时使用的包括4米或者是2米的都有，中间是带孔的

，带有反转边，便于灌装，生产效率高，降低了各种使用的问题。

公路防撞墙模板制作的公路防撞墙混凝土构件主要是在高速公路的两侧或者是中间

的位置进行使用的，在生产的过程中，需要注意的是要保证模具的拼接严密，钢模

具它自身是有着很强的硬度，为了方便他的拆模，就需要将模具设计可拆卸的形态

才可以，这样也就要求工人在生产之前，一定要进行检查模具，看一下有没有拼接

遗漏的问题出现。

The mold of highway anti-collision wall is generally operated by cast-

in-situ, which is fixed and then poured into the mold. Highway anti-

collision wall molds are generally used on expressways. We often see

various anti-collision walls on expressways. These walls are spliced by

highway anti-collision wall molds, which meet certain use standards and

adopt circular arc design. They are usually used, including 4m or 2m,

with holes in the middle and reverse edges, which is convenient for

filling and high production efficiency, It reduces various use problems.

The concrete components of highway anti-collision wall made by highway

anti-collision wall formwork are mainly used on both sides or in the

middle of the highway. In the process of production, it should be noted

that the mold should be tightly spliced. The steel mold itself has strong

hardness. In order to facilitate its removal, the mold needs to be

designed in a detachable form, This requires workers to check the mold

before production to see if there is any problem of missing splicing.